How to choose the right surf fishing rod holders for trucks & Boats (Explained)

surf fishing rod holders for truck

How do you choose the right surf fishing rod holders for trucks? Choosing the right surf fishing rod holders for your truck or boat can be a daunting task.

There are many types of fishing rod holders to consider, and they all have pros and cons. Here, we will walk through some common things to look out for when choosing a product.

We’ll start by going over what makes up a good surf fishing rod holder, then cover how to install one on your vehicle before going into specifics about specific models that work well in different situations. Let’s dive in!

Top 5 surf fishing rod holders for trucks

How do you transport a fishing pole in truck?

Surf fishing rod holders for trucks are designed to attach directly to your truck’s bed. If you don’t have a bed in your truck, you can also mount one on the back of the cab or on the roof with crossbars (or “roof rack”). The benefit of installing them in your vehicle like this is that it leaves the bed free to haul ladders, buckets, and other gear.

What you should look for when choosing a fishing pole holder for your truck?

  • A fishing pole holder for your truck should be easy to install and not take up much space, but also allow you to store your rods in a way that keeps them organized, secure, and protected.
  • A fishing rod holder for your truck should be able to fit a variety of different types and sizes of rods without having to be changed.
  • Fishing truck pole holder should have a locking mechanism to keep your rods from falling out.
  • A fishing rod holder for trucks should have an easy release system for quick access to your rods.
  • The fishing rods holder made of stainless steel or something else that is rust-resistant.

How to install a surf fishing rod holder? (Installing a rod holder on a truck)

Mounting your surfing rod holders onto the bed of your truck or roof rack is a simple process that requires a few basic tools and about half an hour of time.

Before installing the rod holders, you’ll need to clean and dry the surface you’re attaching it to using a cleaner. Once your bed is completely dry, start by installing the brackets on either side of the bed. It’s important to use brackets that attach securely and at a 90-degree angle so you can add support beams easily in the future.

To install the support beams, simply place them over the brackets and slide them down until they lock. Now you can attach your rod holders to the support beam using the bolts provided.

Surf fishing truck setup Pro Tips:

To keep your rods from rolling around, add padding between each one – this can be foam or something as simple as a cloth.

If you’re using one of these types of rod holders for a surf fishing rod, thread your line through the eyelets of your lures to keep from tangling them.

Before threading your line through the eyelets, you should use some rubber bands to attach the lures to the rod.

If you’re using one of these rod holders for your surf fishing rods, keep them stored inside a bag. This will protect them during transportation and when you’re not using them.

If you need to easily access for your rods, but don’t want to potentially lose or damage them, attach your rod holder to the bed of your truck but not inside it. This will leave the rods right where you need them without taking up any space in the bed of your truck.

How you can install rod holder on your boat?

If you’re looking to mount a rod holder on a boat, your best option is going to be bolting it into the deck. You should do this using stainless steel fasteners and the bracket should be mounted securely with no exposed screws.

If you’re not into that, there are rod holders you can install inside the boat next to each other. This leaves room for more fishing gear and keeps your rods organized and close at hand.

You can also mount one of these holders on the side of your boat using a kayak pole mount, but there are some precautions you should take.

The rod should be inserted into the holder with the line facing out, and if you’re planning to leave your rods in it as you move around the boat, there should be padding between each one.

Before threading your line through the eyelets, you should use some rubber bands to attach the lures to the rod. This will keep them from tangling with other rods and help protect your fishing line.

The 10 best surf fishing rod holders for trucks and boats

Fishing is a great hobby, but fishing from a boat or truck can be difficult. The problem with most surf fishing rod holders is that they are too small to hold large rods and too big to store in your vehicle. This makes it hard for people who want to fish from their cars or trucks.

The following products are the cream of the crop when it comes to surf fishing rod holders for your vehicle or boat. They will make your life easier while saving you time and effort in setting up your gear each time you go out on the water.

So if you’re looking for some great ways to transport your rods safely, then these are what we recommend!

1. Brocraft Fishing rod holder for truck hitch mount truck rod rack

2. Bunker up Fishin’ rear hitch fishing rod holder for Truck, SUV or Car

3. Fish-N-Mate 6-Holder receiver hitch fishing rod holders

4. Bekith 2 Pack Adjustable Hitch fishing rod holder with lock

5. Marinebaby aluminum rod racks for trucks and boats (Blue)

6. Brocraft aluminum trailer hitch mounted fishing rod holder (Truck Bed Rod Holder)

7. Angler’s Fish-n-Mate Fishing pole holder for front of truck

8. Plattinum Surf mate rod/cooler racks Combo (Mill Finish)

9. Plattinum Rod and cooler rack for truck Combo with Notch Caps

10. Engel Surf fishing rod and cooler rack

Brocraft Fishing rod holder for truck hitch mount rod rack

Have your fishing rod on the go. The Hitch Mount 6-Pole Rod Holder keeps your pole either inside or outside of your vehicle with ease, no more struggling with roof racks or chasing away every time you have to stop for gas.

Made with marine grade. aluminum and CNC processing, this hitch mount holder represents ultimate durability, install in minutes with no tools necessary, weighing only 7lbs. It is perfect for many vehicles. This item comprises one unit per box.

Bunker up Fishin’ rear hitch fishing rod holder for truck, SUV or Car

This truck fishing rod holder will keep you organized. The stainless steel construction and strong hinges come together to keep your rods secure and in place, while we store them in the six strapping holders on this fishing rod holder.

Get organized with all the space you need for up to 6 rods! With a surface measuring 26 inches wide by 14 inches long, this Truck Fishing Rod Holder gives you room enough to accommodate most styles of poles when it’s time to store them for an outing. They included two mounts in the price-one 2 mount that attaches easily to trailer hitches with loose pins or snug hitches with adjustable clamps, plus one 3 square hitch can install into any hitch receiver made from chrome.

Fish-N-Mate 6-Holder receiver hitch fishing rod holders

Fish-N-Mate 6 Holder RV Rod Rack Mount is the best fishing pole rack mount on Amazon. This product features an aluminum finish and professional craftsmanship. It’s a must-have for any angler with its quality parts and attachments, offering ease of access to storage. Keep your ever hood perfect this year and purchase the Fish N Mate 6 Hander RV Rod Rack Mount today!

Now you too can use your Shakespeare kids rod as furniture at home or in the office with our new furniture protection plan that will cover up to $1 million each year for rod scratches; because we know accidents happen when you’re least expecting them around furniture! We provide three different options (all including unlimited rekeying coverage) like original, enhancement,

Bekith 2 Pack Adjustable Hitch fishing rod holder with lock

Get two fishing poles that will be ready to fish with this nifty setup! There is no more need to lug around your gear. Simply attach the combo mount and rod holders come right up. They made this product of durable stainless steel, has adjustable power lock rods, and rotates 360 degrees for easy use.

Marinebaby aluminum rod racks for trucks and boats (Blue)

The Marinebaby aluminum fishing rod holder is easily mounted anywhere on the boat rail. The grip knobs are located for easy grabbing. There are three rods that can be quickly changed out by popping off one clip and switching to another.

They included the marine baby dolly adaptor with the purchase, so you can use our locking carabiners to attach it down so there’s no chance of getting jumbled up or damaged during transit.

This product comes in a blue color, which will initially grab your attention because it could help make your boat stand out from others when other anglers walk by looking for their boats next time they’re at the dock while also catching anyone else’s attention making them see you before other anglers can spot them sitting around.

It’s a great way to store your rods safely and securely on a boat or a vehicle. This is one of the best fishing gear products you should for this year.

Brocraft aluminum trailer hitch mounted fishing rod holder (Truck Bed Rod Holder)

This Aluminum Rod Holder clamps easily onto any Truck Bed or boat. The Clamp opens up 2.5-inches wide for a secure fit and its sturdy but lightweight construction will do as much as possible to keep those precious casts from smashing their soft little hooks against the blacktop!

Easy ratchet system secures screw tight even on steep inclines, features “LENO” rubber padding to protect your paddle. Keep your rods and other fishing tackle at the ready, ready to be thrown into the water.

Angler’s Fish-n-Mate Fishing pole holder for front of truck

A Sixth-generation rack system can accommodate rods of all sizes. Height is extendable with optional extensions to suit fishing needs, with built-in storage for over 36 accessories to the rack that are easily accessible without having to remove any items from the holder. Customizable vehicle mounts feature padding, marine-grade carpeting, and stainless steel hardware for improved endurance against extreme weather conditions.

Nested design minimizes space during transport compared to other products on market, making it perfect for outdoor enthusiasts looking to maximize space inside their boat or home.

Plattinum Surf mate rod/cooler racks Combo (Mill Finish)

Keep your cooler secured during weekend fishing trips with Plattinum Products Rod Rack Cooler Holder Combo (Mill Finish). This all-aluminum construction is in a mill-style finish. It fits all 48-54 quart coolers and slides into the standard 2″ receiver hitch for quick transportation. This adjustable-height rack allows you to place rods of any size up to 1 5/8″ diameter. Dimensions are 7 ½ inches x 6 3⁄4 inches x 19 ¾ inch high dimensions, or 6 ¼ inches wide by 9 ⅝ feet deep without the legs. There’s no better way to transport that ice-cold beer from shore than with this handy set!

Plattinum Rod and cooler rack for truck Combo with Notch Caps

Now you can tote your gear while not getting it wet! No more tying your rods onto the side of the truck or worrying about them swinging behind tires while driving off-road. The Plattinum Products Fishing Rod Holder Cooler Holder Combo w/Notch Caps (Mill Finish) is an all-aluminum design that slides into standard 2″ receiver hitch and holds most 48-54 quart coolers, such as Igloo 54 Quart Round Dual Zone Thermoelectric WEATHERBEATER with Compressor Cover and Tundra 50 Quart Wheeled Polyethylene Ice Chest. Can fit rod diameter up to 1 5/8″. Comes with our upgraded soft vinyl notch caps, so products stay in place and don’t slide over.

Engel Surf fishing rod and cooler rack

Designed to help you stay hydrated and cool on the go, this Engel Cooler/Dry Box with 4 Rod Holders – 30 Qt – Tan (UC30T-RH) is a durable option to transport food or drinks from one location to another. It can hold up to 48 cans, 45 pounds of ice, and features tight seals for insulation and. durability. The Rubbermaid Cooler can be used as a cooler or as a dry box and is made of sturdy, non-rusting material.

Bestseller No. 1
Dev Fishing RB 100 Truck Bed Aluminum Adjustable Rod Rack Pole Holder...
  • Fits any truck bed 55-70 inches
  • 4x Rod Holders
  • Rubber feet prevents slippage on and scratching of truck beds
  • Heavy-Duty ratcheting system adjusts easily
Bestseller No. 2
Rod Hauler Fishing Rod Holder For Pickup Trucks. Holds Up To 4 Fishing...
  • 🎣 Effortless Transport: The Rod Hauler securely holds your...
  • 🚗 Tailored for Pickup Trucks: Engineered to seamlessly...
  • ✅ Quick Installation: No need for complicated tools or drilling...
  • 💡 Space-Saving Design: Maximize your truck bed's storage...
Bestseller No. 3
Sidasu Fishing Rod Holder for Truck,Rod Holders for Fishing Stainless...
  • 🐟【High quality Stainless Steel】The fishing rod holder is...
  • 🐟【Reflective Warning Strip】Adding two warning strips on...
  • 🐟【Quick Release Pin】Prevent the rod from slipping out and...
  • 🐟【Easy Installation】Designed to fit 2" receivers for easy...
Bestseller No. 4
Portarod Inshore Rod Holder for Truck Bed (5 Rod Holder)
  • Fits Any Truck: The ratcheting support bar is expandable...
  • Customize Portarod To Your Needs: Adjust the vertical angel of...
  • Easy To Use: The ratchet action allows you to easily and firmly...
  • Easy To Store: Portarod is fully removable (Locks are available)....
Bestseller No. 5
Brocraft Aluminum Clamp on Rod Holder for Truck or Boat / Truck Bed...
  • Fiber-glass Injected Nylon construction, 6061-T6 Aluminum Track
  • Holds 4 rods/reels ,Bungee cords keep your rods safe and secure ,
  • Marine aluminum Universal C- Clamp. Clamp opens to a maximum of...
  • Keeps rods organized for Truck , canoes, pontoon
Bestseller No. 6
GOORIDA Hitch Mount Fishing Rod Holder, Fishing Pole Rack for Truck...
  • 【Secure Rod Holder with Quick-Release Pin】Prevent rod from...
  • 【Versatile Silicone Sleeve Set】Match your Fishing Rod...
  • 【Easy Installation】Designed to fit 2" receivers for easy...
  • 【Solid and Stable】Accommodates up to 5 rod tubes with 1.57"...
Bestseller No. 7
Ducurt Fishing Rod Rack Holders Wall-mounted Fish Pole Holder for...
  • 6-rod Racks: The fishing rod holders is 13.6 inch long and 2.5...
  • Space Saver: You can easily screw the fishing rod racks to your...
  • Wall Mounted Fishing Rod Rack: Each pair fishing pole holders...
  • Protective and Secure: Equipped with soft EVA foam assorted in...
SaleBestseller No. 8
Viking Solutions VFR006 6 Rod Truck Bed Mounted Aluminum and Steel...
  • Truck bed-mounted rack fits up to 6 rods with reels attached
  • All stainless steel with powder-coated black finish construction...
  • Adjustable width allows use in most pickups (compact and...
  • Easily fastens to the crossbar with self-drilling stainless...
Bestseller No. 9
WITHFAB Fishing Rod Holders for Car, Fishing VRC Vehicle Rod Carrie,...
  • 🎣 High Quality Material: Portable and stylish rack and...
  • 🎣 Adjustable Fishing Rod Holder: One size suitable for all...
  • 🎣 Vehicle Rod Carrier: The fishing pole Holds your rods in...
  • 🎣 Easy to Install: Hang the nylon sling across your...
Bestseller No. 10
Roylvan 2 Pack Vehicle Fishing Rod Holder for Car, Fishing Pole Car...
  • 🎣【Store and Transport Your Fishing Rods】This fishing rod...
  • 🎣【5 Slots and 2 Buckles】5-slot fishing rods capacity with...
  • 🎣【Adjustable Length】The tackle rod rack storage belt can...
  • 🎣【Space Saving】When going on a fishing trip with family,...

Custom surf fishing racks for trucks

For those who want a cool, dry place to store their food and drinks. The Engel Cooler/Dry Box w/4 Rod Holders – 30 Qt – Tan (UC30T-RH) is a cooler that can be used as a dry box.

This all-aluminum fishing rod rack easily attaches to the truck bed and adjusts from 38″ to 48″. The fully functional arms slide into a pocket on the top of the rack. It also features a rod holder, two heavy-duty adjustable cam buckles to secure the cooler in place, and detachable bait trays.

How to make a custom fishing rod holder for trucks

Tired of throwing your rods in the backbox or rear basket? Keep them organized and accessible with the use of a fishing rod rack. This custom fishing rod rack is perfect for any angler’s trailer hitch. It fits most standard-size rear trailer hitches, and you can make one in under an hour using common tools.

Custom Rod Holder Keep your rods safe and out of the way with this custom rod holder. The major advantage of this design is that we can make cheaply it and easily, fit any vehicle.

Fish n mate bucket holder Fits Cart Rod Holder

Protect your catch with the Fish-N-Mate 549 Bucket Holder Fits Cart Rod Holder! The holder can hold a maximum of a five-gallon bucket and mounts it into one of the rod holders. Use it to keep bait alive or freshwater for cleaning fish, or use it as an extra seat before heading back home at the end of a fishing trip. It’s ideal for spaces where space is limited like on boats, piers, camp docks, kayak decks, picnic tables, and more.

surf mate rod cooler racks Receiver Mount

This Fishing rod cooler racks will fit on most boat and cart rod holders. It is made of fine sturdy plastic that can withstand the elements and weights maximize at 65 pounds, yet ultralight fishing rod enough to carry great distances with ease! The unit mounts quickly by inserting two screws provided to hole in the bucket holes. Fits 12” X 18” standard 3-1/2 gallon polymer buckets as well as other brands.

Fish N Mate beach fishing carts with big wheels

Three hundred ten plus pounds of fish resources at your fingertips. Decked with six, 6-inch diameter poly wheels with 5/8 inch holes for easy rolling over any terrain–no front wheel to get in the way when you gather up all your gear.

A detachable handle with three-position adjustments lets you set yourself up just right–and it folds down so it doesn’t take up any more space than necessary when transporting heavy loads back to camp or car.

Plenty of room in the vinyl rob tube covers on both sides for everything you need to keep fresh fish alive and kicking long after they’re iced down (minus live bait). With stabilizer legs set low for stability, this high-capacity cart does not tip over.

The Fish N Mate is the ultimate tool for all of your fishing needs. The lightweight aluminum frame provides you with transportability and stability wherever your journey takes you.

Manufactured from corrosion-resistant aluminum tubing, this cart won’t fall apart from hours on the water or salt water exposure. Plus, as a bonus, there are attachments included to boot!

In addition to being affordable and durable, it’s easy to assemble – just attach two swivel hooks and four Teflon coated wheels! You’ll be ready in no time at all because we know that when getting into position is crucial to making a catch. Make sure you’re prepared with a Fish N Mate!

Angler’s Fish-n-Mate front bumper fishing rod holder

It’s difficult to find the perfect location for your rods when you’re on the road or boat. Angler’s Choice has come up with a convenient solution – The Fish-n-Mate Bumper Mount! Now say goodbye to yet another unsightly rod holder in your car, truck, or boat.

This mount will allow you to position your fishing rods neatly and safely right next to the bumper of your vehicle (it even has an extension fitting!), within arm’s reach. Never worry about forgetting something important ever again!

No more rummaging around under-seat trying not to damage delicate lines… no more spilling bait boxes all over the garage floor at home or work… no more stepping over Fishing Rods that hide under beds, sofa.

LBHMEI 2 Pack surf fishing racks jeeps Adjustable Vehicle Fishing Rod Holder

Protect your car from damage and free up space with the LBHMEI 2 Pack Car Fishing Rod Holder, Adjustable Vehicle Fishing Rod Holder Straps. You can store a fishing rod or cast net in any part of your vehicle to save you a bit of time on a day out.

They have designed this for both Jeep and Non-Jeep vehicles so everyone can use it! The Wall Mount plug profile also securely holds the holder in place once installed with no drilling required – just fasten with screws. It’s not that hard to set up this mount either, just attaches the polyester strap around corners of headrests or handlebars, then loop through slots on the carrier rack. With this package deal from LBHMEI, you get.

Commonly Asked Questions about fishing rod holders for boat & DIY fishing rod holder (FAQ)


If you transport your fishing rods in a car or truck, it may be difficult to find the right holder for your needs. They make the most popular type of rod holders from aluminum and can go on any flat surface, such as a dashboard, console, or dash panel. There is not much installation involved with these types of holders; just attach them to where they will sit and Voila! For trucks with back seats that fold down completely (or almost), there are some special models available which allow an angler to stand up when casting, knocking nothing off their head or shoulders by using two clamps attached together at different heights. This way the rod remains steady while being cast into waves near shorelines. Boat owners have more.

You might also like:

Spread the love
error: Content is protected !!
Scroll to Top